Legrand CS Series 360° PIR Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Legrand CS Series 360° PIR. Legrand CS Series 360° PIR User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 8
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Syracuse, NY 13221
800.223.4185
Installation Instructions
CS Series
360° PIR Occupancy Sensor
Specifications
Voltages . . . . . . . . . . . . . . . . . . . . .20–30VDC (24VDC Typical)
Current Consumption . . . . . . . . . . .@24VDC, 11mA Maximum
Time Adjustment . . . . . . . . . . . . . . . . .15 seconds–30 minutes
Sensitivity Adjustment . . . . . . . . . . . . . . .Minimum/Maximum
U.S. Patents:
4,757,204 4,787,722
Des360,842
Zobrazit stránku 0
1 2 3 4 5 6 7 8

Shrnutí obsahu

Strany 1 - Installation Instructions

Syracuse, NY 13221800.223.4185Installation InstructionsCS Series360° PIR Occupancy SensorSpecificationsVoltages . . . . . . . . . . . . . . . . . . .

Strany 2 - COVERAGE PATTERNS

DESCRIPTIONThe CS Series sensor is a 24VDC Passive Infrared (PIR) occupancy sensorwhich controls lighting or HVAC systems based on occupancy in a give

Strany 3 - CS Sensor

PLACEMENTThe effective coverage distances may be slightly less than the maximumsensing distance (see Coverage Patterns), depending upon obstacles such

Strany 4 - INSTALLATION

Visit our website at www.passandseymour.comINSTALLATIONCAUTIONTURN POWER OFF AT CIRCUIT BREAKER BEFORE INSTALLING SENSORA 4-S junction box can be used

Strany 5 - WIRING DIRECTIONS

Call 800.223.4185 for Technical SupportMASKINGAn insert (mask) is supplied to allow elimination of coverage in unwantedareas.The mask is cut as needed

Strany 6 - SENSOR ADJUSTMENT

SENSOR ADJUSTMENTThe sensor comes factory preset and ready for operation.If testing of operation is desired:• Remove the sensor’s cover (twist).• Refe

Strany 7 - TROUBLESHOOTING

TROUBLESHOOTINGCAUTIONUSE PROPER SAFETY PRECAUTIONS WHENWORKING WITH OR NEAR HIGH VOLTAGELights will not turn on:1. Verify the lens is not masked in t

Strany 8 - ORDERING INFORMATION

ORDERING INFORMATIONCatalog# DescriptionCS500 20–30VDC Occupancy Sensorwith High Density/Reduced Range LensCS1200 20–30VDC Occupancy Sensorwith Extend

Komentáře k této Příručce

Žádné komentáře